物理演示实验开放教学的探讨

介绍了以能力培养为主线的定性与半定量物理演示实验开放式教学模式及其在我校的运作情况。     

MES动态修饰PDMS芯片毛细管电泳电化学检测多巴胺和肾上腺素

在2-(N-吗啉)乙磺酸(MES)动态修饰的聚二甲基硅氧烷(PDMS)微通道中,采用在柱安培检测方式,分离并测定了神经递质多巴胺和肾上腺素.实验中对分离电压、检测电位以及添加剂浓度等参数进行了探讨和优化.结果表明,修饰后的通道减少了对被测物的吸附,有效提高了分离度,多巴胺和肾上腺素的检测限分别为2.0 μmol/L和3.7 μmol/L.     

PINNING EFFECT OF LEAD LANTHANUM TITANATE THIN FILMS DEPOSITED ON DIFFERENT SUBSTRATES

Pinning effect of lead lanthanum titanate (PLT) ferroelectric thin films with excess PbO of 20 mol% has been studied for deposition on diffe rent substrates. Silicon, sapphire and quartz were used as substrates on which P t/Ti or LaNiO₃ thin films were deposited as bottom electrodes. Electron probe analysis results showed that there was still a certain amount of excess Pb in PLT films after annealing at 550 ℃ for 1 h, and the amount of it was dependent on the substrate used. The distribution of excess Pb in the films was investig ated by Auger electron spectroscopy depth profile. It was shown that the substrates and the bottom electrodes had significant effects on the content and distrib ution of excess Pb in PLT films. The excess Pb and its accumulation at the inter face between the film and bottom electrode may act as pinning centers and have a pinning effect on domains, which can be observed by abnormal P-E hysteresis loops and abnormal C-V curves. The excess Pb content in the films and the accumulation of Pb at the interface were high in PLT films deposited on Pt/Ti/S i, and considerable pinning effect was observed. As LaNiO₃ would absorb most part of the excess Pb in PLT films, the content of excess Pb in the films deposited on LaNiO₃/Si was very low and the pinning effect was hardly observed.     

叶片扩压器进口安装角对离心压缩机性能影响的数值与实验研究

对不同扩压器进口安装角下离心压缩机的性能进行了实验研究,并详细计算分析了相应的流场分布。分析表明, 不同的进口安装角对压缩机的流动有较大的影响,压缩机的性能曲线也有不同程度的左右偏移;进口处较大的正冲角和负冲角均会在扩压器叶片表面出现大尺度的分离涡团;在给定的流量工况下,应存在一个最佳的进口安装角,使得扩压器效率最高;设计工况下,最高效率所对应的冲角并非为零。     

纳米复合固体超强酸SO_4~(2-)/ZrO_2-Fe_2O_3的制备及其催化合成硝基苯的研究

采用纳米化学技术制备了新型的纳米复合固体超强酸催化剂SO42-/ZrO2-Fe2O3,并用XRD、TEM进行了表征.结果表明:所研制的SO42-/ZrO2-Fe2O3催化剂为晶态纳米粒子,平均粒径为30 nm,分散性较好;当活化温度为580℃,反应温度为75℃,n(硝酸)/n(苯)=2,m(苯)/m(催化剂)=20,催化反应时间5 h时,硝基苯收率可达89.6%.     

POLYMERIZATION MECHANISM OF N-VINYLCARBAZOLE WITH CHIRALLY ORGANIC SALT AS CATALYST

The polymerization mechanism is described by the conductance changewith the time during the polymerization. The mechanism can be explained by the equi-librium feature (i.e. main ion-pairs) between the free ions and the ion-pairs dissociated bythe organic salt (-) Sp~/(*~+) (+) CSA~(*~-) (An asterisk represents the chirality) and the schemeof the polymerization process is described mainly by the charge transfer complexes havingchiral induction power.     

熔融浸渍法制备锂离子电池正极材料LiMn2O4的研究

采用LiNO3和MnO2为原料,在650℃下制备了尖晶石型的LiMn2O4.通过X射线衍射、扫描电子显微镜、热重分析和电化学性能测试,发现该化合物具有很高的放电比容量和较好的循环性能,首次放电比容量可达到122 mA·h/g.并对循环性能衰减的各种因素进行了讨论.     

超声场下苯酚吸附相平衡和均相催化剂氧化降解实验研究

测定了常规条件和超声场条件下苯酚在活性炭上的吸附等温线,并研究了超声再生活性炭和均相催化剂氧化降解苯酚实验.研究结果表明,超声场作用下苯酚在活性炭上的吸附等温线降低,平衡吸附量减少,被脱附下来的苯酚及时被Cu2 和Fe3 型催化剂氧化降解,吸附剂得到更彻底再生,避免了二次污染,而且再生后的活性炭均具有较高的二次吸附能力,对于处理低浓度含酚废水具有实际意义.     

Studies on Electrochemical Property of LiFePO4/C as Cathode Material for Lithium Ion Batteries

IntroductionLithium ion batteries are key components of mobiletelephones and portable computers.Among the knownLi-intercalation materials for lithium ion battery cath-odes,LiCoO2,LiNiO2,and LiMn2O4have been stud-ied extensively[1—3].LiCoO2is nowused in c…     

甲胺磷离子选择性电极的研制及其应用

以四苯硼钠与甲胺磷在盐酸介质中生成的离子缔合物为电活性物质,首次研制出一种甲胺磷PVC涂层玻璃电极。并对该电极的响应机理及性能进行了研究。实验表明,该电极的Nernst响应范围为1×10-2~1×10-4(φ),斜率为50.28 mV/pφ。该电极响应迅速,重复性好,用于蔬菜中残留甲胺磷的测定,方法快速、准确,结果满意。